Giga Enerlogic lift inverters are engineered to provide reliable backup power for elevators during electrical outages. These systems ensure smooth lift operation, passenger safety, and controlled movement in residential, commercial, and industrial buildings.
Lift Inverter
Lift Inverter
Product Overview
Key Features
Specially Designed Elevator Inverter
Pure Sinewave Output
High Efficiency IGBT Based Design
Microcontroller Controlled Operation
Excellent Transient Response for Lift Loads
Built-in Forced Air Cooling
Supports Balanced & Unbalanced Loads
Comprehensive Electrical Protections
Designed for Continuous & Reliable Operation
Technical Specifications
Rated Capacity
3, 5, 7.5, 10, 20, 30KVA
Nominal Input Voltage
415VAC
Input Voltage Range
415VAC
Nominal Input Frequency
50Hz
Input Frequency Range
47 To 53Hz
Output Voltage (Mains Mode)
415VAC
Output Voltage (Inverter Mode)
415 VAC ±1 %
Output Waveform
Pure Sinewave
Line & Load Regulation
±1%
Output Phase Displacement
120° (±1°)
Battery Charging Mode
Boost, Trickle, Float (CVCC Type)
Inverter Efficiency
92 % at 360 VDC
Total Harmonic Distortion (Linear Load)
<2%
Total Harmonic Distortion (Non-Linear Load)
<5%
Transient Response
Overshoot & Undershoot ±2 %
Recovery Time
<5ms
Changeover Time (Mains → Inverter)
<1sec
Changeover Time (Inverter → Mains)
<200ms
Output Load Type
Balanced Load
Unbalanced Load Capacity
10–15%
Cooling Method
Inbuilt Forced Air Cooling
Audible Noise Level
<40db
Operating Temperature Range
0 to 55°C
HV Breakdown Test (I/P to O/P)
1200 VAC for 1 min
HV Breakdown Test (I/P to Earth)
1200 VAC for 1 min
HV Breakdown Test (O/P to Earth)
1200 VAC for 1 min
Insulation Resistance (I/P to Earth)
10 MΩ at 500 VDC
Insulation Resistance (O/P to Earth)
10 MΩ at 500 VDC
Isolation Between Input & Output
Ultra Isolation
Input Protections
High / Low Cut-off, Phase Fail
DC Protections
DC Under Voltage, DC Over Voltage
Output Protections
Short Circuit, Overload (R-Y-B), Over / Under Voltage
Battery Protections
Battery Low Trip
Thermal Protection
Over Temperature
Charger Protection
Charger Trip
Status Indications
Mains ON, Phase Fail, Battery Low, Load on Mains, Load on Inverter
MTBF
100,000Hours
EMI / EMC Standard
FCC Class B (Line filter at I/P & O/P)
Degree of Protection
IP54
Control Interface
Micro Switches on Front Panel
Metering
Analog Meter on Front Panel
Cabinet Finish
Milky White & Pepsi Blue (Glossy)